DIY Birthday in a Box (aka: the best gift ever)

Birthday in a box. A cute fun idea you can send to any age or gender!

How much fun would it be to receive everything you would need to have a party perfectly tucked neatly into a colorful box? Imagine opening it up and being able to dress in a hat, toot a horn, throw up confetti, and whack a pinata! How fun! Well now you can make one for that special person in your life.

This birthday in a box contains:

  • 4 balloons (bought)
  • Birthday Hat (directions below)
  • Birthday ribbon (directions below)
  • Confetti (directions below)
  • Mini pinata (directions below)
  • Toot horns (directions below)
  • Birthday Card (Printable below)
  • Small gift or gift card (optional)

WARNING: Get ready for a mega long blog post ;D

diy birthday in a box

 

Let’s get started with SUPER GLITTERY CONFETTI:

what you need

 

 

 

  • Scrapbook paper
  • 1” punch
  • Regular hole punch
  • Sack
  • Glue
  • Pen

It sounds like a lot, but this is also a mini tutorial on how to make a cute coordinating bag :)

DIY FUN 007

Okie doke, so….

DIY FUN 008 DIY FUN 013 DIY FUN 011 DIY FUN 010 To make the confetti, all you need to do is punch a bunch of circles out with your 1” whole punch. Seriously…BAM, done.

Now don’t you just want to get a spoon and eat it!? I mean, it’s glitter and confetti, all rolled into one! How could you not want to take a bite? :)

.

Storage. You can’t just throw the confetti in the birthday box and hope for the best, for this birthday in a box, you want to store that glittery awesomeness in something, so how about a darling bag?

I got my pink one at HEB actually. 25 cents…what could be better than having the cashier say: “your grand total is one quarter.”

Nothing! That’s what. :)DIY FUN 015

Where that flap lands, (The dark shadow in the pic) cut a straight line across so you are able to stick something all the way through (like a tunnel)

DIY FUN 017

DIY FUN 019

Fold one of the ends up and glue in place (about an inch)

So now only one end should be open, kind of like, well, a bag :)

DIY FUN 021

Punch some little coordinating circles out and glue on the bag to add a little touch of personality.

DIY FUN 121

Finally, add in the confetti and seal the bag with a 1” white circle glued on the open flap that reads: “confetti”

The confetti is done, now for the TOOT HORNS:

what you need

 

 

 

  • Toot horns from the dollar store or other party supply store
  • Coordinating scrapbook paper (I used 3 different colors)
  • Hot glue gun and stix
  • Scissors
  • Crepe paper or tissue paper

DIY FUN 122

Tear up a horn

Yeah you heard me right :)

Take one of the horns you bought and disassemble it by pulling off the noise part and then undoing the glued part of the paper/cardboard/horn part (this will be your pattern)

For as many horns as you have, using your pattern, cut out different colors/pieces of colorful paper

DIY FUN 023

Stick a little hot glue on the horn and place one end of the paper on it.

DIY FUN 026

Wrap it around, add a bit more of hot glue on the other end and glue it down

DIY FUN 027

See?

DIY FUN 028 DIY FUN 029

Stick it back in the noise part and hot glue in place.

DIY FUN 030

DIY FUN 031

To add a bit of extra fun, cut a strip of tissue paper 2 inches wide and glue around the large part of the horn

Cut the ends so it flairs out!

Oh, and don’t forget to TOOT AWAY! Blow one of those suckers as loud as you can (it’s kind of like a stress reliever…for you, not the people around you – ha!)

DIY FUN 037

Now how about a PARTY HAT??

what you need

 

 

 

DIY FUN 118

 

DIY FUN 038Cut out your pattern piece

DIY FUN 042

Assemble and  glue in a cone with a wee hole at the top

DIY FUN 043

DIY FUN 045

  DIY FUN 046DIY FUN 047

DIY FUN 048Make a pompom

If you don’t know how to do this, wrap yarn around about three fingers. When your fingers begin to hurt and turn red, I think you have wrapped enough.

Tie a piece of yarn around the middle so there are two sets of loops on either side.

Cut the lops, trim, and shake a bit to poof it up.

DIY FUN 049

Tie a long piece around the pompom and string the end through the wee hole at the top of the hat

DIY FUN 054 DIY FUN 051

Glue the pompom and loose string in place.

DIY FUN 058 DIY FUN 057

I did this after, but it would be much easier to do this part before you embellish the bottom half of the paper hat (that at this moment should look awesome!)

Punch a hole on either side of the hat

Thread a VERY long piece of ribbon through and tie a HUGE knot so it will never ever ever ever come out! bwhahahahahahaha…..okay, sorry

DIY FUN 055 DIY FUN 056

anyway, to embellish, Cut a 1” wide piece of tissue paper

Cut evenly spaced fringe on either side

Staple or glue it to the bottom edge of the hat

DIY FUN 063

OoOooOOooo that looks good darling!

 

Alrighty, next I’ll show you how to make a mini pinata.

DIY pinata

what you need

 

 

 

  • Cardboard box
  • Candy
  • Tape
  • tissue paper or crepe paper
  • Scissors

DIY FUN 065

Cut out two identical shapes. I chose the classic donkey look, of course. Here is the pattern I made, but it is slightly large, so you are going to need a big box (I used an Under Armour shoe box)

DIY FUN 066

DIY FUN 072

Cut a strip of cardboard (mine was 2.5” wide) and following the shape of your pinata, make a sort of box using lots of tape.

DIY FUN 076

On the piece not yet attached, cut out a little “door” for all that candy goodness to get stuffed in.

fill the pinata

Assemble on the open end and stuff that sucker with candy galore!

Seal off the “door” with tape

DIY FUN 084Just as you did with the toot horns, cut about a 2” wide piece of tissue paper, cut it to look like fringe, and then hot glue around the pinata, starting with the legs and overlapping every time you move up.

It will look like this (hopefully) when you are done:

it's done!

 

Now for birthday ribbons:

diy ribbon

what you need

 

 

 

  • 4 strips of paper 4” x 3”
  • Two cordinating pieces 1” x 6”
  • Safety pin
  • glue stick – glue gun – and glue stix
  • Scissors
  • Pen or marker

DIY FUN 086DIY FUN 087DIY FUN 093DIY FUN 089

Remember those paper fans you made as a kid? Well take those 4 year old skills out of the old memory bank and fold all four pieces of 3×4 paper. Pics will help :)

DIY FUN 090

Fold each one of those “fans” in half, so it looks like you have 8 mini fans.

DIY FUN 091

Glue them together to make a larger “fan” (you should have four)

DIY FUN 094

Glue them in sets of two, so you have two even larger “fans”

let dry

DIY FUN 096

Glue those two together on one side, let dry, and then stretch slightly and glue the other end to make one giant circle!

DIY FUN 097

Take your 1×6 strips and cut the ends to look like a V

DIY FUN 098

Glue these strips to the back and finish it off with a paper circle to make it look cleaner

DIY FUN 106

Write a Happy Birthday message on another circle and glue to the front

DIY FUN 107

Finish by hot gluing a safety pin to the back circle (you may need a lot of glue to keep it in place)

DIY FUN 119

Voila! There you have it!

Assemble it, decorate the box and:

DIY FUN 126 DIY FUN 127 DIY FUN 128 DIY FUN 129 DIY FUN 130 DIY FUN 131

DIY FUN 114

Finish off the birthday in a box with THIS CARD on the top that says on the front: READ ME FIRST

Whew! I warned ya, this is the longest post ever! But glad you made it to the bottom. You can celebrate your awesomeness by pinning this image:)

diy birthday in a box

Finally, to the recipient of this box:

HAPPY BIRTHDAY SWEETY!

Hope you had a great one!

Thanks for reading everyone and please feel free to Facebook this, pin it, or tweet it!

See ya later alligator!

______________________________________________

 

 

 

DIY balloon invitation (blow up and pop)

Forget all the reasons why it won’t work, and believe the one reason why it will.

____________________________________________________

Tons of awesomeness is happening soon! To start, lil’bro is getting older on March 8th!

Happy Birthday Pal!

Also, I’m going to share a bedroom tutorial with you! Just between me and you, I’m redoing lil’bro’s room and I am going to surprise him with the finished product soon. :) I think I’m the one who is extra excited!!!

There will be a DIY tutorial for an industrial coffee table, a solid wood bed for under 50$, coasters, and more! Come back often to check all of these things out. Oooooooor……search for what your looking for in the search bar on the right side of the screen! –>

Today though, it is invitation time! To have a birthday, you have to send out invitations, so how about making some cute ones? These invitations are pop-able too! Want to know more? Read on Chickadee:

PicMonkey

DIY BALLOONS

All you need to make each invitation is:

Dog bath January 2015 081

 

That’s all! Print out the card on the card stock of your choice

Dog bath January 2015 082

Cut the invitation details to size, roll up like a diploma, tie with string and stuff into the balloon

Dog bath January 2015 083

Poke two little holes in the invitation small enough to keep the balloon “neck” in place. Measure if needed.

Dog bath January 2015 088

With the party details inside, tie the balloon to the card with DIY bakers twine or other string.

Dog bath January 2015 087

Dog bath January 2015 084Add a coordinating pin at the bottom.

Your friends are ready to go blow and pop! Hand them out, and close your ears for the loud popping soon to happen. ‘_’

Dog bath January 2015 091  Dog bath January 2015 093

Dog bath January 2015 094

_______________________________________________

I would LOVE for you to share this on Facebook or Twitter, and show me how yours turned out and be featured in an upcoming blog post

See ya later alligator!

Caroline

Free Google Page Rank

%d bloggers like this: